Line:
Natural Ledge veneer panels
Color:
Bayside Waters
Stone type:
Slate
Panel size:
Approx. 6" x 24" (about 1 sq. ft.)
Thickness:
Approx. 3/4" to 1-1/4"
Components:
Stepped panel, double corner panel, finished ends, stepped (dog-ear) corners
Listed weight:
About 13.5 lbs per panel (approx. 1 sq. ft.)
This is a reference page. The product line described here was sold by the company that previously operated eastweststone.com. The current site does not sell stone products and is not affiliated with that company. Product details are summarized from the original public product pages and may no longer be accurate.
Bayside Waters was one of the best-known colors in the original Natural Ledge line. It was a slate panel, described as providing a rich, textured and sophisticated look to any wall. Natural Ledge panels were offered in multiple colors with matching corner and end pieces so a wall could be finished cleanly at every edge.
Bayside Waters panels showed up in home renovation projects and fireplace makeovers, including homeowner discussions on hearth and fireplace forums. Slate ledgestone of this type remains a popular choice for fireplace surrounds because of its layered texture and cool, multi-tone color.
Suggested uses:
Interior walls
Exterior walls
Pools and spas
Columns
Fireplaces
Archways
Backsplashes
Outdoor kitchens
If you are planning a fireplace, accent wall or exterior wainscot with a look similar to Bayside Waters, ask local stone suppliers for natural slate ledgestone panels in blue-gray, charcoal and rust blends. Bring a photo of the look you want; color names vary between suppliers.
At roughly 13.5 pounds per square foot, natural slate panels are heavier than most manufactured stone, so the wall preparation and mortar system should be suitable for natural thin veneer. Around a fireplace, follow the fireplace manufacturer's clearance requirements for any combustible mantel.
Planning a project with this kind of stone? Read our guides to how stone veneer is installed.
The original product pages listed Bayside Waters as a slate, sold in the Natural Ledge, Classic Ledge and Contemporary panel lines as well as in flagstone and finishing pieces.
Not from this website. Similar natural slate ledgestone panels are available from many stone suppliers under different color names.
Slate panels are a common fireplace facing. Install them as adhered veneer outside the firebox, and follow the fireplace or insert manufacturer's instructions for clearances and facing materials.
Real quarried thin stone for authentic color, texture and longevity.
Want a similar stone look installed? Request a Free Estimate
